PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 068369000P
068369000P ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, material: STEEL OVERALL, first_end_style: CHAMFERED, style_designator: GROOVE, surface_treatment: CHROMIUM OVERALL, first_end_location: BOTH ENDS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-037-8345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
068369000P
NSN: 5315-01-037-8345
FSC: 5315
CAGE: 84561 — PARKER HANNIFIN CORPORATION DBA PNEUTRONICS DIV CYLINDER DIVISION (USA)
SPECIFICATIONS
diameter0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
materialSTEEL OVERALL
first_end_styleCHAMFERED
style_designatorGROOVE
surface_treatmentCHROMIUM OVERALL
first_end_locationBOTH ENDS
NSN5315-01-037-8345
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 068369000P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: GROOVE
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CHROMIUM OVERALL
•
FIRST END LOCATION: BOTH ENDS
•
DIAMETER: 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORGROOVE
MATERIALSTEEL OVERALL
SURFACE TREATMENTCHROMIUM OVERALL
FIRST END LOCATIONBOTH ENDS
DIAMETER0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
68-369Interchangeable
interchangeable cross-reference
interchangeable
123-5941946 PART 166Interchangeable
interchangeable cross-reference
interchangeable
123-5901610 PART 166Interchangeable
interchangeable cross-reference
interchangeable
82026Interchangeable
interchangeable cross-reference
interchangeable
1000282-03Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 068369000P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 068369000P?
068369000P is a PIN,GROOVED,HEADLESS.
What parts can replace 068369000P?
There are 5 known substitutes for 068369000P: 68-369, 123-5941946 PART 166, 123-5901610 PART 166 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 068369000P?
068369000P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-037-8345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 068369000P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026