PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 068021
068021 ✓ Verified by PartsTable
Legrand · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a Legrand industrial component. Key specifications include bore_diameter: 1.3755 INCHES MINIMUM AND 1.3766 INCHES MAXIMUM IN, overall_width: 1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RING, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-3775, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
068021
NSN: 3110-00-902-3775
FSC: 3110
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
bore_diameter1.3755 INCHES MINIMUM AND 1.3766 INCHES MAXIMUM IN
overall_width1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter1.6250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
NSN3110-00-902-3775
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 068021 · Legrand ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
MATERIAL: STEEL COMP 8615 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OUTER RING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
MATERIALSTEEL COMP 8615 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OUTER RING
SURFACE FINISHGROUND
MATERIALSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE IN OUTER RING
OVERALL WIDTH1.2400 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
BORE DIAMETER1.3755 INCHES MINIMUM AND 1.3766 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
3-641Interchangeable
interchangeable cross-reference
interchangeable
115-949Interchangeable
interchangeable cross-reference
interchangeable
48285Interchangeable
interchangeable cross-reference
interchangeable
647592-2Interchangeable
interchangeable cross-reference
interchangeable
MM-2TCInterchangeable
interchangeable cross-reference
interchangeable
LS-211/UInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 068021?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 068021?
068021 is a BEARING,ROLLER,NEEDLE manufactured by Legrand.
What parts can replace 068021?
There are 21 known substitutes for 068021: 3-641, 115-949, 48285 and 18 more. Substitute compatibility should be verified for your specific system.
Is 068021 still available?
068021 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 068021

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026