PartsTable
Technical Data Sheet
PartsTable / O-RING / 06689213183E7
06689213183E7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, center_hole_diameter: 0.915 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-312-7863, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06689213183E7
NSN: 5331-00-312-7863
FSC: 5331 — O-RING
CAGE: 15187 — EMERSON AUTOMATION SOLUTIONS FINAL CONTROL US LP DIV NAVY PRODUCT TEAM (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
center_hole_diameter0.915 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-312-7863
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 06689213183E7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A6689.213.343Interchangeable
interchangeable cross-reference
interchangeable
20202PC39Interchangeable
interchangeable cross-reference
interchangeable
216-4455070Interchangeable
interchangeable cross-reference
interchangeable
A06689.213.324Interchangeable
interchangeable cross-reference
interchangeable
20195PC37Interchangeable
interchangeable cross-reference
interchangeable
A6689-213-183Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06689213183E7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06689213183E7?
06689213183E7 is a O-RING.
What parts can replace 06689213183E7?
There are 8 known substitutes for 06689213183E7: A6689.213.343, 20202PC39, 216-4455070 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06689213183E7?
06689213183E7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-312-7863. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06689213183E7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026