PartsTable
Technical Data Sheet
PartsTable / MRO / 06622
06622 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include width: 24.000 INCHES NOMINAL IN, length: 36.000 INCHES NOMINAL IN, material: STEEL OVERALL, body_style: W/THD BUSHING MTG, TERMINALS ON OPPOSITE ENDS, bore_shape: STRAIGHT, body_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 06622
NSN: 3110-00-156-4243
FSC: 3110
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
width24.000 INCHES NOMINAL IN
length36.000 INCHES NOMINAL IN
materialSTEEL OVERALL
body_styleW/THD BUSHING MTG, TERMINALS ON OPPOSITE ENDS
bore_shapeSTRAIGHT
body_length0.875 INCHES NOMINAL IN
body_diameter0.400 INCHES NOMINAL IN
bore_diameter25.00 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.6000 INCHES NOMINAL IN
NSN3110-00-156-4243
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 06622 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.6000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: GREASE
•
SEAL QUANTITY: 1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING WIDTH0.6250 INCHES NOMINAL IN
INNER RING WIDTH0.6000 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
SEAL QUANTITY1
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
D20/13/-0Interchangeable
interchangeable cross-reference
interchangeable
NAV0Interchangeable
interchangeable cross-reference
interchangeable
354AL3516-10Interchangeable
interchangeable cross-reference
interchangeable
712963-60Interchangeable
interchangeable cross-reference
interchangeable
SR196P68392T16Interchangeable
interchangeable cross-reference
interchangeable
5801Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06622?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06622?
06622 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 06622?
There are 23 known substitutes for 06622: D20/13/-0, NAV0, 354AL3516-10 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06622?
06622 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06622

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026