PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 06617
06617 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include special_features: STRAP FOR SI BALLISTIC M-FRAME, RETENTION STRAP CONNECTS TO EACH EAR.. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-307-7025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06617
NSN: 5330-00-307-7025
FSC: 5330
CAGE: 77842 — EATON CORPORATION DBA EATON INOAC DIV EATON (USA)
SPECIFICATIONS
special_featuresSTRAP FOR SI BALLISTIC M-FRAME, RETENTION STRAP CONNECTS TO EACH EAR.
NSN5330-00-307-7025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 06617 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER GROOVE WIDTH: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.007 INCHES MINIMUM AND 2.017 INCHES MAXIMUM IN
•
INNER GROOVE DEPTH: 0.121 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 2.432 INCHES MINIMUM AND 2.453 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.280 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
INNER GROOVE WIDTH0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SPECIAL FEATURESCHAMFERED ON ONE OUTTER EDGE
CENTER HOLE DIAMETER2.007 INCHES MINIMUM AND 2.017 INCHES MAXIMUM IN
INNER GROOVE DEPTH0.121 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER2.432 INCHES MINIMUM AND 2.453 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.280 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
06617Interchangeable
interchangeable cross-reference
interchangeable
NAS907 TYASZFInterchangeable
interchangeable cross-reference
interchangeable
298-640Interchangeable
interchangeable cross-reference
interchangeable
B6617Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06617?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06617?
06617 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 06617?
There are 4 known substitutes for 06617: 06617, NAS907 TYASZF, 298-640 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06617?
06617 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-307-7025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06617

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026