PartsTable
Technical Data Sheet
Download PDF

0650710 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0650710: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING, outside_diameter: 1.250 INCHES MINIMUM AND 1.253 INCHES MAXIMUM IN, special_features: COLOR BLUE, style_designator: CUP, material_thickness: 0.036 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-116-1131, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0650710
NSN: 5340-01-116-1131
FSC: 5340 — Hardware, Commercial
CAGE: 13446 — PERKINS ENGINES INC (USA)
SPECIFICATIONS
height0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING
outside_diameter1.250 INCHES MINIMUM AND 1.253 INCHES MAXIMUM IN
special_featuresCOLOR BLUE
style_designatorCUP
material_thickness0.036 INCHES NOMINAL IN
NSN5340-01-116-1131
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0650710 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.250 INCHES MINIMUM AND 1.253 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
MATERIAL THICKNESS: 0.036 INCHES NOMINAL IN
•
HEIGHT: 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.250 INCHES MINIMUM AND 1.253 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
MATERIAL THICKNESS0.036 INCHES NOMINAL IN
HEIGHT0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR BLUE
MATERIALSTEEL CORROSION RESISTING
SUBSTITUTES & CROSS-REFERENCES 1
39626Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0650710?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0650710?
0650710 is a PLUG,EXPANSION.
What parts can replace 0650710?
There is 1 known substitute for 0650710: 39626. Substitute compatibility should be verified for your specific system.
What is the NSN for 0650710?
0650710 is cataloged in the U.S. Government catalog under NSN 5340-01-116-1131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0650710