PartsTable
Technical Data Sheet
Download PDF

0648-92-110 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0648-92-110: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, slot_width: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, slot_length: 0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, overall_width: 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED AND OBLONG. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-199-1242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0648-92-110
NSN: 5340-01-199-1242
FSC: 5340 — Hardware, Commercial
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
diameter0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
slot_width0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
slot_length0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
overall_width0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED AND OBLONG
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.098 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.629 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
NSN5340-01-199-1242
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0648-92-110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.098 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED AND OBLONG
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.629 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
•
SLOT WIDTH: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
OVERALL WIDTH0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.098 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED AND OBLONG
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.629 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
SLOT WIDTH0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SLOT LENGTH0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0648-92-110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0648-92-110?
0648-92-110 is a CLAMP,LOOP.
What is the NSN for 0648-92-110?
0648-92-110 is cataloged in the U.S. Government catalog under NSN 5340-01-199-1242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0648-92-110

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.