PartsTable
Technical Data Sheet
PartsTable / O-RING / 064-17107
064-17107 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-404-8191, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
064-17107
NSN: 5331-00-404-8191
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
NSN5331-00-404-8191
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 064-17107 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
S746205Interchangeable
interchangeable cross-reference
interchangeable
X101Interchangeable
interchangeable cross-reference
interchangeable
B107.600 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
RE-52Interchangeable
interchangeable cross-reference
interchangeable
359-SInterchangeable
interchangeable cross-reference
interchangeable
373297-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 064-17107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 064-17107?
064-17107 is a O-RING.
What parts can replace 064-17107?
There are 17 known substitutes for 064-17107: S746205, X101, B107.600 TY1CL2 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 064-17107?
064-17107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-404-8191. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 064-17107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026