PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 063-07N0-04
063-07N0-04 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SHOULDERED is a the manufacturer industrial component. Key specifications include hole_diameter: 1.630 INCHES MINIMUM AND 1.633 INCHES MAXIMUM IN, shoulder_height: 0.250 INCHES NOMINAL IN, outside_diameter: 2.368 INCHES MINIMUM AND 2.370 INCHES MAXIMUM IN, style_designator: SHOULDERED, shoulder_diameter: 1.751 INCHES NOMINAL IN, material_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-7326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
063-07N0-04
NSN: 5310-00-013-7326
FSC: 5310
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
hole_diameter1.630 INCHES MINIMUM AND 1.633 INCHES MAXIMUM IN
shoulder_height0.250 INCHES NOMINAL IN
outside_diameter2.368 INCHES MINIMUM AND 2.370 INCHES MAXIMUM IN
style_designatorSHOULDERED
shoulder_diameter1.751 INCHES NOMINAL IN
material_thickness0.062 INCHES NOMINAL IN
NSN5310-00-013-7326
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 063-07N0-04 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 1.630 INCHES MINIMUM AND 1.633 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 1.751 INCHES NOMINAL IN
•
SHOULDER HEIGHT: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED
•
OUTSIDE DIAMETER: 2.368 INCHES MINIMUM AND 2.370 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER1.630 INCHES MINIMUM AND 1.633 INCHES MAXIMUM IN
SHOULDER DIAMETER1.751 INCHES NOMINAL IN
SHOULDER HEIGHT0.250 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED
OUTSIDE DIAMETER2.368 INCHES MINIMUM AND 2.370 INCHES MAXIMUM IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
S4-85Interchangeable
interchangeable cross-reference
interchangeable
5440-2Interchangeable
interchangeable cross-reference
interchangeable
NAS1329S4-85Interchangeable
interchangeable cross-reference
interchangeable
A-1-1/4NL90-1-2 53Interchangeable
Same NIIN cross-reference
interchangeable
A-1-1/4NL90-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 063-07N0-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 063-07N0-04?
063-07N0-04 is a WASHER,SHOULDERED.
What parts can replace 063-07N0-04?
There are 5 known substitutes for 063-07N0-04: S4-85, 5440-2, NAS1329S4-85 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 063-07N0-04?
063-07N0-04 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-7326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 063-07N0-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026