PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 062Z10
062Z10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.156 INCHES NOMINAL IN, housing_bore_diameter: 0.626 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-584-8997, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
062Z10
NSN: 5330-00-584-8997
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.156 INCHES NOMINAL IN
housing_bore_diameter0.626 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.312 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-584-8997
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 062Z10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 0.626 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.156 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER0.626 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.156 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
3070Interchangeable
interchangeable cross-reference
interchangeable
150-570HPC79Interchangeable
interchangeable cross-reference
interchangeable
150-614ITEM74Interchangeable
interchangeable cross-reference
interchangeable
150-580GPC79Interchangeable
interchangeable cross-reference
interchangeable
820797Interchangeable
interchangeable cross-reference
interchangeable
7412022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 062Z10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 062Z10?
062Z10 is a SEAL,PLAIN ENCASED.
What parts can replace 062Z10?
There are 17 known substitutes for 062Z10: 3070, 150-570HPC79, 150-614ITEM74 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 062Z10?
062Z10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-584-8997. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 062Z10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026