PartsTable
Technical Data Sheet
Download PDF

062967 — RESISTOR,FIXED,FILM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

062967: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, design_type: SPLIT, end_diameter: 0.9850 INCHES NOMINAL IN, bore_diameter: 0.8600 INCHES NOMINAL IN, overall_height: 0.4380 INCHES NOMINAL IN, style_designator: SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-761-7461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 062967
NSN: 5340-00-761-7461
NIINs: 007617461, 010734412
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
design_typeSPLIT
end_diameter0.9850 INCHES NOMINAL IN
bore_diameter0.8600 INCHES NOMINAL IN
overall_height0.4380 INCHES NOMINAL IN
style_designatorSEAT
first_step_diameter1.3750 INCHES NOMINAL IN
electrical_resistance4.870 KILOHMS
distance_from_end_to_first_step0.3250 INCHES NOMINAL IN
resistance_tolerance_in_percent-1.000 TO 1.000
power_dissipation_rating_in_watts0.250 FREE AIR
NSN5340-00-761-7461
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 062967 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 1.3750 INCHES NOMINAL IN
•
END DIAMETER: 0.9850 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.3250 INCHES NOMINAL IN
•
DESIGN TYPE: SPLIT
•
STYLE DESIGNATOR: SEAT
•
BORE DIAMETER: 0.8600 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.4380 INCHES NOMINAL IN
FIRST STEP DIAMETER1.3750 INCHES NOMINAL IN
END DIAMETER0.9850 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.3250 INCHES NOMINAL IN
DESIGN TYPESPLIT
STYLE DESIGNATORSEAT
BORE DIAMETER0.8600 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
SUBSTITUTES & CROSS-REFERENCES 3
03-605904Reference document
Same NSN cross-reference
Reference document — Secondary reference
028291Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7617461Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 062967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 062967?
062967 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 062967?
There are 3 known substitutes for 062967: 03-605904, 028291, 7617461. Substitute compatibility should be verified for your specific system.
What is the NSN for 062967?
062967 is cataloged in the U.S. Government catalog under NSN 5340-00-761-7461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 062967