PartsTable
Technical Data Sheet
Download PDF

0625B0380-14 — ROLLER,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

0625B0380-14: ROLLER,BEARING.

The ROLLER,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, overall_length: 0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN, special_features: SET OF 14 ROLLERS IN WAXED STRIP, style_designator: NEEDLE ROLLER, CRANK PIN, rolling_element_diameter: 0.0623 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, material_document_and_classification: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-037-8779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0625B0380-14
NSN: 3110-01-037-8779
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
overall_length0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
special_featuresSET OF 14 ROLLERS IN WAXED STRIP
style_designatorNEEDLE ROLLER, CRANK PIN
rolling_element_diameter0.0623 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-037-8779
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0625B0380-14 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.0623 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NEEDLE ROLLER, CRANK PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP E52100 OVERALL
TECHNICAL CHARACTERISTICS
ROLLING ELEMENT DIAMETER0.0623 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
STYLE DESIGNATORNEEDLE ROLLER, CRANK PIN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
SPECIAL FEATURESSET OF 14 ROLLERS IN WAXED STRIP
MATERIALSTEEL COMP E52100 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
64338AReference document
Same NSN cross-reference
Reference document — Secondary reference
64338BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 0625B0380-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0625B0380-14?
0625B0380-14 is a ROLLER,BEARING.
What parts can replace 0625B0380-14?
There are 2 known substitutes for 0625B0380-14: 64338A, 64338B. Substitute compatibility should be verified for your specific system.
What is the NSN for 0625B0380-14?
0625B0380-14 is cataloged in the U.S. Government catalog under NSN 3110-01-037-8779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0625B0380-14