PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 062438
062438 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND COTTON OVERALL, hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.000 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.812 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-627-6822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
062438
NSN: 5330-00-627-6822
FSC: 5330
CAGE: 31974 — HOFFMAN/NEW YORKER, INC. (USA)
SPECIFICATIONS
materialCORK AND COTTON OVERALL
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.000 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter2.812 INCHES NOMINAL IN
bolt_hole_quantity4
fsc_application_dataWASHING MACHINE,LAUNDRY COMMERCIAL
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.688 INCHES NOMINAL IN
NSN5330-00-627-6822
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 062438 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 4
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: CORK AND COTTON OVERALL
•
APERTURE DIAMETER: 2.812 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 3.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY4
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALCORK AND COTTON OVERALL
APERTURE DIAMETER2.812 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH5.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH5.000 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5936Interchangeable
interchangeable cross-reference
interchangeable
5936AInterchangeable
interchangeable cross-reference
interchangeable
062438Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 062438?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 062438?
062438 is a GASKET.
What parts can replace 062438?
There are 3 known substitutes for 062438: 5936, 5936A, 062438. Substitute compatibility should be verified for your specific system.
What is the NSN for 062438?
062438 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-627-6822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 062438

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026