PartsTable
Technical Data Sheet
Download PDF

0624107 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0624107: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include knuckle_type: FRICTION, pin_diameter: 0.090 INCHES NOMINAL IN, overall_length: 8.673 INCHES MINIMUM AND 8.703 INCHES MAXIMUM IN, knuckle_quantity: 15, performance_type: NOT RATED, pin_removability: NONREMOVABLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-185-7567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0624107
NSN: 5340-00-185-7567
FSC: 5340 — Hardware, Commercial
CAGE: 4J976 — REGAL AIR, INC. (USA)
SPECIFICATIONS
knuckle_typeFRICTION
pin_diameter0.090 INCHES NOMINAL IN
overall_length8.673 INCHES MINIMUM AND 8.703 INCHES MAXIMUM IN
knuckle_quantity15
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
special_featuresDRILLED FOR COTTER PIN 0.040 IN. DIA EACH END IN
style_designatorBUTT
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
mounting_hole_quantity4
NSN5340-00-185-7567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0624107 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.090 INCHES NOMINAL IN
•
MOUNTING HOLE QUANTITY: 4
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
HINGE MOUNTING TYPE: FULL SURFACE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.090 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY4
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
OVERALL LENGTH8.673 INCHES MINIMUM AND 8.703 INCHES MAXIMUM IN
PIN CENTER TO BODY EDGE DISTANCE0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
HINGE MOUNTING TYPEFULL SURFACE
PIN REMOVABILITYNONREMOVABLE
KNUCKLE QUANTITY15
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 0624107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0624107?
0624107 is a HINGE,BUTT.
What is the NSN for 0624107?
0624107 is cataloged in the U.S. Government catalog under NSN 5340-00-185-7567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0624107

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.