PartsTable
Technical Data Sheet
06154 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, material_document_and_classification: AMS-7274 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-4817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06154
NSN: 5330-00-006-4817
FSC: 5330
CAGE: 05852 — BARNSTEAD THERMOLYNE CORPORATION DBA BARNSTEAD INTERNATIONAL DIV LABORATORY EQUIPMENT (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
material_document_and_classificationAMS-7274 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-006-4817
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 06154 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-7274 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-7274 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
G394236Interchangeable
interchangeable cross-reference
interchangeable
53494Interchangeable
interchangeable cross-reference
interchangeable
G394236-1Interchangeable
interchangeable cross-reference
interchangeable
06154Interchangeable
interchangeable cross-reference
interchangeable
ED25-68Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06154?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06154?
06154 is a COIL,RADIO FREQUENCY.
What parts can replace 06154?
There are 5 known substitutes for 06154: G394236, 53494, G394236-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06154?
06154 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-4817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06154