PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 06112
06112 ✓ Verified by PartsTable
Legrand · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a Legrand industrial component. Key specifications include overall_length: 8.000 INCHES NOMINAL IN, special_features: PLASTIC; FOR BREAKING OUT OR NIPPING GLASS UP TO 1/4 IN. THICK IN, end_item_identification: VSECK.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-555-5236, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06112
NSN: 3110-00-555-5236
FSC: 3110
CAGE: 03956 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
overall_length8.000 INCHES NOMINAL IN
special_featuresPLASTIC; FOR BREAKING OUT OR NIPPING GLASS UP TO 1/4 IN. THICK IN
end_item_identificationVSECK
NSN3110-00-555-5236
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 06112 · Legrand ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY2
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
784-8-20Interchangeable
interchangeable cross-reference
interchangeable
AN515-8R20Interchangeable
interchangeable cross-reference
interchangeable
1177-8-20Interchangeable
interchangeable cross-reference
interchangeable
10554038-10Interchangeable
interchangeable cross-reference
interchangeable
80410Interchangeable
interchangeable cross-reference
interchangeable
26859Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06112?
06112 is a BEARING,BALL,ANNULAR manufactured by Legrand.
What parts can replace 06112?
There are 24 known substitutes for 06112: 784-8-20, AN515-8R20, 1177-8-20 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06112?
06112 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-555-5236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026