PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 06011350
06011350 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.8750 INCHES NOMINAL IN, bore_diameter: 1.2500 INCHES NOMINAL IN, special_features: AXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE AND CONE STABILITY POINT ON SHAFT AXIS .2000 IN. IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06011350
NSN: 3110-00-100-9812
FSC: 3110
CAGE: Z1N46 — RFD (AUSTRALIA) PTY LTD SURVITEC GROUP AUSTRALIA (AUS)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8750 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
special_featuresAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE AND CONE STABILITY POINT ON SHAFT AXIS .2000 IN. IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-9812
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 06011350 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.8750 INCHES NOMINAL IN
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.8750 INCHES NOMINAL IN
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE AND CONE STABILITY POINT ON SHAFT AXIS .2000 IN. IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2475Interchangeable
interchangeable cross-reference
interchangeable
02475Interchangeable
interchangeable cross-reference
interchangeable
0BT2475Interchangeable
interchangeable cross-reference
interchangeable
654876Interchangeable
interchangeable cross-reference
interchangeable
188279Interchangeable
interchangeable cross-reference
interchangeable
N458Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06011350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06011350?
06011350 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 06011350?
There are 20 known substitutes for 06011350: 2475, 02475, 0BT2475 and 17 more. Substitute compatibility should be verified for your specific system.
Is 06011350 still available?
06011350 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06011350

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026