PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 06-617

06-617 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include special_features: STRAP FOR SI BALLISTIC M-FRAME, RETENTION STRAP CONNECTS TO EACH EAR.. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-307-7025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06-617
NSN: 5330-00-307-7025
FSC: 5330
CAGE: 77842 — EATON CORPORATION DBA EATON INOAC DIV EATON (USA)
SPECIFICATIONS
special_featuresSTRAP FOR SI BALLISTIC M-FRAME, RETENTION STRAP CONNECTS TO EACH EAR.
NSN5330-00-307-7025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 06-617 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER GROOVE WIDTH: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.007 INCHES MINIMUM AND 2.017 INCHES MAXIMUM IN
•
INNER GROOVE DEPTH: 0.121 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 2.432 INCHES MINIMUM AND 2.453 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.280 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
INNER GROOVE WIDTH0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SPECIAL FEATURESCHAMFERED ON ONE OUTTER EDGE
CENTER HOLE DIAMETER2.007 INCHES MINIMUM AND 2.017 INCHES MAXIMUM IN
INNER GROOVE DEPTH0.121 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER2.432 INCHES MINIMUM AND 2.453 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.280 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
NAS907 TYASZFInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
298-640InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
B6617InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
2113 FInterchangeableGOVERNMENT REGISTRY
Connector,receptacle,electrical
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06-617?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06-617?
06-617 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 06-617?
There are 4 known substitutes for 06-617: NAS907 TYASZF, 298-640, B6617 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06-617?
06-617 is cataloged in the Federal Logistics Information System under NSN 5330-00-307-7025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06-617

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026