PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 06-211-10-016
06-211-10-016 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OR STEEL COMP 410 OR STEEL COMP 416 OUTER LAYER, corner_shape: SQUARE ALL CORNERS, overall_length: 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES RIGHT END SURFACE OF BODY, hardness_rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-003-4099, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06-211-10-016
NSN: 3120-00-003-4099
FSC: 3120
CAGE: 09455 — RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OR STEEL COMP 410 OR STEEL COMP 416 OUTER LAYER
corner_shapeSQUARE ALL CORNERS
overall_length0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES RIGHT END SURFACE OF BODY
hardness_rating27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
body_outside_diameter0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
NSN3120-00-003-4099
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 06-211-10-016 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
•
BODY OUTSIDE DIAMETER: 0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY INSIDE DIAMETER: 0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
BODY OUTSIDE DIAMETER0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE OUTER LAYER
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
CORNER SHAPESQUARE ALL CORNERS
BODY INSIDE DIAMETER0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
OVERALL LENGTH0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS81934/1Interchangeable
interchangeable cross-reference
interchangeable
M81934/1-10C016Interchangeable
interchangeable cross-reference
interchangeable
AS81934Interchangeable
interchangeable cross-reference
interchangeable
KDJ10C016-240Interchangeable
Same NIIN cross-reference
interchangeable
MS21240-10C016Interchangeable
Same NIIN cross-reference
interchangeable
MIL-B-81934/1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06-211-10-016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06-211-10-016?
06-211-10-016 is a BEARING,SLEEVE.
What parts can replace 06-211-10-016?
There are 8 known substitutes for 06-211-10-016: AS81934/1, M81934/1-10C016, AS81934 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 06-211-10-016?
06-211-10-016 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-003-4099. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06-211-10-016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026