PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 06-0768
06-0768 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include special_features: REFRIGERATED AT 36-46, end_item_identification: FOR USE W/PICCOLO CHEMISTRY ANALYZER, part_name_assigned_by_controlling_agency: PANEL BASIC METABOLIC PLUS PICCOLO ANALYZER 10S. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-368-3930, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
06-0768
NSN: 5330-01-368-3930
FSC: 5330
CAGE: 07632 — SERRA MANUFACTURING CORPORATION DBA SERRA MANUFACTURING (USA)
SPECIFICATIONS
special_featuresREFRIGERATED AT 36-46
end_item_identificationFOR USE W/PICCOLO CHEMISTRY ANALYZER
part_name_assigned_by_controlling_agencyPANEL BASIC METABOLIC PLUS PICCOLO ANALYZER 10S
NSN5330-01-368-3930
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 06-0768 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 6.415 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
CROSS-SECTIONAL THICKNESS: 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: COPPER ALLOY AND COTTON OVERALL
•
OUTSIDE DIAMETER: 6.780 INCHES NOMINAL IN
•
FSC APPLICATION DATA: GAS TURBINE ENGINE
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER6.415 INCHES NOMINAL IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
CROSS-SECTIONAL THICKNESS0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALCOPPER ALLOY AND COTTON OVERALL
OUTSIDE DIAMETER6.780 INCHES NOMINAL IN
FSC APPLICATION DATAGAS TURBINE ENGINE
END ITEM IDENTIFICATIONGTC85-71A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
6640NCM060625Interchangeable
interchangeable cross-reference
interchangeable
07P02-13Interchangeable
interchangeable cross-reference
interchangeable
400-0031Interchangeable
interchangeable cross-reference
interchangeable
74655-4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 06-0768?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 06-0768?
06-0768 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 06-0768?
There are 4 known substitutes for 06-0768: 6640NCM060625, 07P02-13, 400-0031 and 1 more. Substitute compatibility should be verified for your specific system.
Is 06-0768 still available?
06-0768 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 06-0768

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026