Multibrackets M Projector Mount Pro HD 40kg White<br>A series of innovative projector HD-mounts with fine tune adjustment possibilities for projectors up to 40kg.<br><br>The M Projector Mount Pro HD 40kg White with a smart fine tune adjustment possibility giving you easy placement of your projector best setting possible. You can orient and incline according to the ingenious fine tune adjustments, alignment with 3-axis angle, X,Y and Z. The model features integrated cable-management, fine tune adjustment, once the projector is in place.
This projector mount has a minimum of surface area to the projector good for not trapping heat close to your projector thus not cutting your projector lamps lifetime.<br><br>The built in fine tune adjustment technology provides a more simplified positioning. That way you can be sure to get a well-balanced position for your projector after installing it. This does not only save installation time but also make room for possible changes of what projector is This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-278-0656, indicating validated use in U.S.
government and defense logistics supply chains.
| material | STEEL OVERALL |
| bore_shape | STRAIGHT |
| seat_radius | 0.422 INCHES NOMINAL IN |
| flange_width | 0.188 INCHES NOMINAL IN |
| bore_diameter | 7.00 MILLIMETERS NOMINAL MM |
| overall_width | 7.0 MILLIMETERS NOMINAL MM |
| load_direction | RADIAL |
| overall_length | 1.094 INCHES NOMINAL IN |
| surface_finish | GROUND |
| special_features | GENDER CHARGER; EMI/RFI SHIELDED; LOW PROFILE (3/16) INCH BETWEEN CONNECTOR SHELLS; CONTACT STYLE DB9; GENDER CONFIGURATION MALE TO MALE |
| style_designator | NON-LOADING GROOVE, NON-SEPARABLE |
| flange_face_diameter | 0.453 INCHES NOMINAL IN |
| NSN | 4730-00-278-0656 |
| OVERALL LENGTH | 1.094 INCHES NOMINAL IN |
| FLANGE OUTSIDE DIAMETER | 0.672 INCHES NOMINAL IN |
| SEAT RADIUS | 0.422 INCHES NOMINAL IN |
| FLANGE INSIDE DIAMETER | 0.406 INCHES NOMINAL IN |
| STYLE DESIGNATOR | COMPRESSION |
| FLANGE FACE DIAMETER | 0.453 INCHES NOMINAL IN |
| SLEEVE OUTSIDE DIAMETER | 0.594 INCHES NOMINAL IN |
| DISTANCE FROM FLANGED END TO TUBING CLEARANCE HOLE | 0.250 INCHES NOMINAL IN |
| FLANGE WIDTH | 0.188 INCHES NOMINAL IN |
| HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.500 INCHES NOMINAL IN |