PartsTable / O-RING / 058094
058094
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU, temp_rating: -55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN, center_hole_diameter: 3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN, elongation_percentage: 260 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-894-1968, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
058094
NSN: 5331-00-894-1968 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU temp_rating -55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN center_hole_diameter 3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN elongation_percentage 260 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-894-1968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 058094
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 260 MAXIMUM
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• OUTSIDE DIAMETER: 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN
• TEMP RATING: -55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN ELONGATION PERCENTAGE 260 MAXIMUM HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL OUTSIDE DIAMETER 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN TEMP RATING -55.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
58094 Interchangeable interchangeable cross-reference
interchangeable
WWC581 Interchangeable interchangeable cross-reference
interchangeable
ANSI UL6 Interchangeable interchangeable cross-reference
interchangeable
AM3227 Interchangeable interchangeable cross-reference
interchangeable
AS568-238 Interchangeable interchangeable cross-reference
interchangeable
938284631U01 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 058094?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 058094?
058094 is a O-RING.
What parts can replace 058094?
There are 24 known substitutes for 058094: 58094, WWC581, ANSI UL6 and 21 more. Substitute compatibility should be verified for your specific system.
Is 058094 still available?
058094 is currently cancelled.