PartsTable
Technical Data Sheet
Download PDF

0568022-2 — COVER,SWITCH ACTUATOR,NONLUMINOU

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

0568022-2: COVER,SWITCH ACTUATOR,NONLUMINOU.

COVER,SWITCH ACTUATOR,NONLUMINOU. Key specifications include material: STEEL CORROSION RESISTING, overall_diameter: 10.2 MILLIMETERS NOMINAL MM, special_features: SHARP EDGES BROKEN (R<0.2) UNLESS OTHER WISE STATED; SURFACE FINISH 3.2, center_hole_diameter: 1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-216-8346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 0568022-2
NSN: 5331-00-216-8346
NIINs: 002168346, 014695602
FSC: 5331 — O-ring
CAGE: 05896 — UHRDEN, INC. DBA TUBAR DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_diameter10.2 MILLIMETERS NOMINAL MM
special_featuresSHARP EDGES BROKEN (R<0.2) UNLESS OTHER WISE STATED; SURFACE FINISH 3.2
center_hole_diameter1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-216-8346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0568022-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
6227-27Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0568022-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0568022-2?
0568022-2 is a COVER,SWITCH ACTUATOR,NONLUMINOU. It is classified as a MRO (MRO_GENERAL).
What parts can replace 0568022-2?
There is 1 known substitute for 0568022-2: 6227-27. Substitute compatibility should be verified for your specific system.
What is the NSN for 0568022-2?
0568022-2 is cataloged in the U.S. Government catalog under NSN 5331-00-216-8346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0568022-2