PartsTable
Technical Data Sheet
056-0203 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, special_features: VINYL COATING IS ON THE LOOP OF THIS ITEM; CONTROLLING AGENCY NAME IS "CLAMP,MISC, TUBING", style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PLASTIC VINYL BAND, loop_inside_diameter: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-499-9813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
056-0203
NSN: 5340-01-499-9813
FSC: 5340
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
special_featuresVINYL COATING IS ON THE LOOP OF THIS ITEM; CONTROLLING AGENCY NAME IS "CLAMP,MISC, TUBING"
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPLASTIC VINYL BAND
loop_inside_diameter2.750 INCHES NOMINAL IN
end_item_identification2320-01-452-5579
NSN5340-01-499-9813
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 056-0203 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL OVERALL
STYLE DESIGNATOR: SINGLE LOOP
SURFACE TREATMENT: PLASTIC VINYL BAND
LOOP INSIDE DIAMETER: 2.750 INCHES NOMINAL IN
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORSINGLE LOOP
SURFACE TREATMENTPLASTIC VINYL BAND
END ITEM IDENTIFICATION2320-01-452-5579
LOOP INSIDE DIAMETER2.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
SPECIAL FEATURESVINYL COATING IS ON THE LOOP OF THIS ITEM; CONTROLLING AGENCY NAME IS "CLAMP,MISC, TUBING"
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A56-39Upgraded Successor
successor cross-reference
successor
2334HXInterchangeable
interchangeable cross-reference
interchangeable
COV-2113Interchangeable
interchangeable cross-reference
interchangeable
2362HXInterchangeable
interchangeable cross-reference
interchangeable
56-260Interchangeable
interchangeable cross-reference
interchangeable
04-21301Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 056-0203?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 056-0203?
056-0203 is a CLAMP,LOOP.
What parts can replace 056-0203?
There are 8 known substitutes for 056-0203: A56-39, 2334HX, COV-2113 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 056-0203?
056-0203 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-499-9813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 056-0203