052962 — FASTENER,PAWL

✓ Government record, cited

Legrand · ORING SEAL

PRODUCT OVERVIEW

052962: FASTENER,PAWL.

The FASTENER,PAWL is a Legrand industrial component. Key specifications include length: 1.062 INCHES NOMINAL IN, material: STEEL AND ZINC ALLOY OVERALL, pawl_type: OFFSET, pawl_swing_angle: 90.0 DEGREES NOMINAL, surface_treatment: CHROMATE AND ZINC OVERALL, operational_direction: LEFT-HAND OR RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-061-3187, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

052962

NSN: 5340-01-061-3187
FSC: 5340 — Hardware, Commercial
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)

SPECIFICATIONS

length	1.062 INCHES NOMINAL IN
material	STEEL AND ZINC ALLOY OVERALL
pawl_type	OFFSET
pawl_swing_angle	90.0 DEGREES NOMINAL
surface_treatment	CHROMATE AND ZINC OVERALL
operational_direction	LEFT-HAND OR RIGHT-HAND
pawl_actuation_method	GRIP HANDLE
mounting_plate_to_pawl_distance	0.031 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
pawl_length_from_actuating_shaft_center_to_pawl_end	0.812 INCHES NOMINAL IN
NSN	5340-01-061-3187

COMPONENT DIAGRAM

KEY FEATURES

•

OPERATIONAL DIRECTION: LEFT-HAND OR RIGHT-HAND

•

MOUNTING PLATE TO PAWL DISTANCE: 0.031 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN

•

LENGTH: 1.062 INCHES NOMINAL IN

•

PAWL ACTUATION METHOD: GRIP HANDLE

•

PAWL TYPE: OFFSET

•

SURFACE TREATMENT: CHROMATE AND ZINC OVERALL

•

MATERIAL: STEEL AND ZINC ALLOY OVERALL

•

PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END: 0.812 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OPERATIONAL DIRECTION	LEFT-HAND OR RIGHT-HAND
MOUNTING PLATE TO PAWL DISTANCE	0.031 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
LENGTH	1.062 INCHES NOMINAL IN
PAWL ACTUATION METHOD	GRIP HANDLE
PAWL TYPE	OFFSET
SURFACE TREATMENT	CHROMATE AND ZINC OVERALL
MATERIAL	STEEL AND ZINC ALLOY OVERALL
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END	0.812 INCHES NOMINAL IN
PAWL SWING ANGLE	90.0 DEGREES NOMINAL

SUBSTITUTES & CROSS-REFERENCES 5

885C052962Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

885F052327 ITEM 18Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

52962Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

62-10-201-10AReference document

Same NSN cross-reference

Reference document — Secondary reference

106974-006Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 052962?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 052962?

052962 is a FASTENER,PAWL manufactured by Legrand.

What parts can replace 052962?

There are 5 known substitutes for 052962: 885C052962, 885F052327 ITEM 18, 52962 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 052962?

052962 is cataloged in the U.S. Government catalog under NSN 5340-01-061-3187. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

052962 — FASTENER,PAWL

Request a Quote — 052962