PartsTable
Technical Data Sheet
Download PDF

05100770 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

05100770: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.690 INCHES NOMINAL IN, overall_length: 5.240 INCHES NOMINAL IN, inside_corner_radius: 0.440 INCHES NOMINAL IN, outside_corner_radius: 0.440 INCHES NOMINAL IN, cross-sectional_thickness: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-725-2300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
05100770
NSN: 5330-00-725-2300
FSC: 5330 — Packing and Gasket Materials
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
hole_diameter0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.690 INCHES NOMINAL IN
overall_length5.240 INCHES NOMINAL IN
inside_corner_radius0.440 INCHES NOMINAL IN
outside_corner_radius0.440 INCHES NOMINAL IN
cross-sectional_thickness0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_width0.470 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.400 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length4.440 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-725-2300
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 05100770 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.440 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.440 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.400 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.440 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.440 INCHES NOMINAL IN
OVERALL LENGTH5.240 INCHES NOMINAL IN
OVERALL WIDTH3.690 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.440 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.400 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.440 INCHES NOMINAL IN
HOLE DIAMETER0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.470 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
08929529Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5162886Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 05100770?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05100770?
05100770 is a GASKET.
What parts can replace 05100770?
There are 2 known substitutes for 05100770: 08929529, 5162886. Substitute compatibility should be verified for your specific system.
What is the NSN for 05100770?
05100770 is cataloged in the U.S. Government catalog under NSN 5330-00-725-2300. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05100770