PartsTable
Technical Data Sheet
Download PDF

050926 — 050926

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

050926: 050926.

The 050926 is a the manufacturer industrial component. Key specifications include special_features: SENSOR BOARD SNS12A SPARE PART ITEM, RADIOGRAPHIC READER, end_item_identification: COMPUTED RADIOGRAPHIC READER NSN 6525-01-505-7191, part_name_assigned_by_controlling_agency: SENSOR BOARD SNS12A COMPUTED RADIOGRAPHIC READER. This part is cataloged in the U.S.

Government catalog under NSN 5990-01-032-7904, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 050926
NSN: 5990-01-032-7904
NIINs: 010327904, 015331562
FSC: 5990 — Synchros and Resolvers
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
special_featuresSENSOR BOARD SNS12A SPARE PART ITEM, RADIOGRAPHIC READER
end_item_identificationCOMPUTED RADIOGRAPHIC READER NSN 6525-01-505-7191
part_name_assigned_by_controlling_agencySENSOR BOARD SNS12A COMPUTED RADIOGRAPHIC READER
NSN5990-01-032-7904
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available 050926 TITLE COMPONENT PN 050926 MFR 050926
KEY FEATURES
•
BODY SIZE: 11
•
SHAFT TYPE: ROUND SINGLE SHAFT
•
FLANGE DIAMETER: 1.0650 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.0500 INCHES NOMINAL IN
•
SHAFT DIAMETER: 0.1200 INCHES NOMINAL SINGLE SHAFT IN
•
ROTOR DC RESISTANCE IN OHMS: 160.00 NOMINAL
•
UNDERCUT DIAMETER: 0.9750 INCHES NOMINAL IN
•
LENGTH: 0.0620 INCHES NOMINAL SHOULDER IN
TECHNICAL CHARACTERISTICS
BODY SIZE11
SHAFT TYPEROUND SINGLE SHAFT
FLANGE DIAMETER1.0650 INCHES NOMINAL IN
UNDERCUT WIDTH0.0500 INCHES NOMINAL IN
SHAFT DIAMETER0.1200 INCHES NOMINAL SINGLE SHAFT IN
ROTOR DC RESISTANCE IN OHMS160.00 NOMINAL
UNDERCUT DIAMETER0.9750 INCHES NOMINAL IN
LENGTH0.0620 INCHES NOMINAL SHOULDER IN
BODY STYLESTANDARD ROUND C
FLANGE THICKNESS0.0930 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
887C050926Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
TGH-11-C-02-B896Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation + specific procedure
Ready to buy 050926?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 050926?
050926 is a 050926. It is classified as a MRO (MRO_GENERAL).
What parts can replace 050926?
There are 2 known substitutes for 050926: 887C050926, TGH-11-C-02-B896. Substitute compatibility should be verified for your specific system.
What is the NSN for 050926?
050926 is cataloged in the U.S. Government catalog under NSN 5990-01-032-7904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 050926

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.