PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 050153-3
050153-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: ONE-PIECE, outside_diameter: 3.678 INCHES MINIMUM AND 3.698 INCHES MAXIMUM IN, surface_treatment: ANODIZE RETAINER, retainer_thickness: 0.080 INCHES NOMINAL IN, material_document_and_classification: W54P-6 FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE PACKING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-320-5138, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
050153-3
NSN: 5330-00-320-5138
FSC: 5330
CAGE: 45681 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionONE-PIECE
outside_diameter3.678 INCHES MINIMUM AND 3.698 INCHES MAXIMUM IN
surface_treatmentANODIZE RETAINER
retainer_thickness0.080 INCHES NOMINAL IN
material_document_and_classificationW54P-6 FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE PACKING
packing_ring_cross-sectional_diameter0.120 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
NSN5330-00-320-5138
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 050153-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
MATERIAL DOCUMENT AND CLASSIFICATION: W54P-6 FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE PACKING
•
SURFACE TREATMENT: ANODIZE RETAINER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
•
CONSTRUCTION: ONE-PIECE
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.120 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.678 INCHES MINIMUM AND 3.698 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC PACKING
MATERIAL DOCUMENT AND CLASSIFICATIONW54P-6 FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE PACKING
SURFACE TREATMENTANODIZE RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
MATERIALALUMINUM ALLOY 6061 RETAINER
CONSTRUCTIONONE-PIECE
PACKING RING CROSS-SECTIONAL DIAMETER0.120 INCHES NOMINAL IN
OUTSIDE DIAMETER3.678 INCHES MINIMUM AND 3.698 INCHES MAXIMUM IN
RETAINER THICKNESS0.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
DLHANDLEInterchangeable
interchangeable cross-reference
interchangeable
DL1Interchangeable
interchangeable cross-reference
interchangeable
195-0256-001Interchangeable
interchangeable cross-reference
interchangeable
BA1100-5Interchangeable
Same NIIN cross-reference
interchangeable
CS1018-5Interchangeable
Same NIIN cross-reference
interchangeable
40188-48Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 050153-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 050153-3?
050153-3 is a PACKING WITH RETAINER.
What parts can replace 050153-3?
There are 6 known substitutes for 050153-3: DLHANDLE, DL1, 195-0256-001 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 050153-3?
050153-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-320-5138. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 050153-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026