PartsTable
Technical Data Sheet

050-112-081/012121 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

050-112-081/012121: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, surface_treatment: PASSIVATE CASE, housing_bore_diameter: 1.124 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-947-0077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
050-112-081/012121
NSN: 5330-00-947-0077
FSC: 5330 — Packing and Gasket Materials
CAGE: 71724 — JOHN CRANE, INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASE
case_styleSQUARE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
surface_treatmentPASSIVATE CASE
housing_bore_diameter1.124 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
NSN5330-00-947-0077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 050-112-081/012121 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.124 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE CASE
•
MATERIAL: STEEL CORROSION RESISTING CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.124 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE CASE
MATERIALSTEEL CORROSION RESISTING CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
CB134-23Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 050-112-081/012121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 050-112-081/012121?
050-112-081/012121 is a SEAL,PLAIN ENCASED.
What parts can replace 050-112-081/012121?
There is 1 known substitute for 050-112-081/012121: CB134-23. Substitute compatibility should be verified for your specific system.
What is the NSN for 050-112-081/012121?
050-112-081/012121 is cataloged in the U.S. Government catalog under NSN 5330-00-947-0077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 050-112-081/012121