PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 05-620001
05-620001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, surface_treatment: CADMIUM CASE, housing_bore_diameter: 1.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-868-8477, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
05-620001
NSN: 5330-00-868-8477
FSC: 5330
CAGE: 31435 — LUCAS AEROSPACE POWER EQUIPMENT CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
surface_treatmentCADMIUM CASE
housing_bore_diameter1.250 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.625 INCHES NOMINAL IN
NSN5330-00-868-8477
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 05-620001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER0.625 INCHES NOMINAL IN
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
2098Interchangeable
interchangeable cross-reference
interchangeable
070-2098-1AInterchangeable
interchangeable cross-reference
interchangeable
247ASC1925-001Interchangeable
interchangeable cross-reference
interchangeable
C377Interchangeable
interchangeable cross-reference
interchangeable
23DCInterchangeable
interchangeable cross-reference
interchangeable
C35614Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 05-620001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05-620001?
05-620001 is a SEAL,PLAIN ENCASED.
What parts can replace 05-620001?
There are 18 known substitutes for 05-620001: 2098, 070-2098-1A, 247ASC1925-001 and 15 more. Substitute compatibility should be verified for your specific system.
Is 05-620001 still available?
05-620001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05-620001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026