PartsTable
Technical Data Sheet
Download PDF

05-340200 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

05-340200: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.378 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 316. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-616-6700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
05-340200
NSN: 5305-00-616-6700
NIINs: 006166700, 016556695
FSC: 5305 — Screws
CAGE: 31435 — LUCAS AEROSPACE POWER EQUIPMENT CORPORATION (USA)
SPECIFICATIONS
head_styleBINDING
head_height0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.378 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
thread_length0.500 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 316
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-00-616-6700
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 05-340200 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
THREAD LENGTH0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 316
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 2
FF-S-92 TY I STY 8SReference document
Same NSN cross-reference
Reference document — Identification reference
FF-S-92TY1STY8S.10-32NF-3AX1/2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 05-340200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05-340200?
05-340200 is a SCREW,MACHINE.
What parts can replace 05-340200?
There are 2 known substitutes for 05-340200: FF-S-92 TY I STY 8S, FF-S-92TY1STY8S.10-32NF-3AX1/2. Substitute compatibility should be verified for your specific system.
What is the NSN for 05-340200?
05-340200 is cataloged in the U.S. Government catalog under NSN 5305-00-616-6700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05-340200

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.