PartsTable
Technical Data Sheet

05-1939 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

MEDICAL EQUIPMENT SET,PATIENT HO. Key specifications include part_name_assigned_by_controlling_agency: MEDICAL EQUIPMENT SET PATIENT HOLDING SQUAD FIELD-LIGHTWEIGHT-2006 UA261A-2006. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5331-01-136-8615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
05-1939
NSN: 5331-01-136-8615
FSC: 5331 — O-RING
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
special_featuresMES, PT HOLD PROVIDES THE NECESSARY SUPPLIES AND EQUIPMENT FOR MINIMAL CARE FOR HOLDINGOF INJURED SOLDIERS, UP TO 20 PATIENTS WITHIN A 72 HOUR PERIOD FOR LIST OF COMPONENTS SEE UA 261A A
part_name_assigned_by_controlling_agencyMEDICAL EQUIPMENT SET PATIENT HOLDING SQUAD FIELD-LIGHTWEIGHT-2006 UA261A-2006
NSN5331-01-136-8615
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 05-1939 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 15.262 INCHES MINIMUM AND 15.322 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.073 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER15.262 INCHES MINIMUM AND 15.322 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.073 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
8708InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
51939InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6545NCM051789InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
PATIENT HOLD 5261InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
887B051939InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 05-1939?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05-1939?
05-1939 is a MEDICAL EQUIPMENT SET,PATIENT HO.
What parts can replace 05-1939?
There are 5 known substitutes for 05-1939: 8708, 51939, 6545NCM051789 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 05-1939?
05-1939 is cataloged in the Federal Logistics Information System under NSN 5331-01-136-8615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05-1939