PartsTable
Technical Data Sheet
05-0236 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include special_features: 90 MM, LIGHTWEIGHT, FLEXIBLE AIRWAY DESIGNED FOR PATIENT COMFORT MM, supplementary_features: INDIVIDUALLY PACKAGED; UNIT QUANTITY 50, part_name_assigned_by_controlling_agency: BERMAN AIRWAY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-147-3445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
05-0236
NSN: 5331-00-147-3445
FSC: 5331 — O-RING
CAGE: 10055 — MARINE ELECTRONICS, LLC SALES (USA)
SPECIFICATIONS
special_features90 MM, LIGHTWEIGHT, FLEXIBLE AIRWAY DESIGNED FOR PATIENT COMFORT MM
supplementary_featuresINDIVIDUALLY PACKAGED; UNIT QUANTITY 50
part_name_assigned_by_controlling_agencyBERMAN AIRWAY
NSN5331-00-147-3445
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 05-0236 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6515NCM050360Interchangeable
interchangeable cross-reference
interchangeable
4095Interchangeable
interchangeable cross-reference
interchangeable
05-0236Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 05-0236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05-0236?
05-0236 is a O-RING.
What parts can replace 05-0236?
There are 3 known substitutes for 05-0236: 6515NCM050360, 4095, 05-0236. Substitute compatibility should be verified for your specific system.
What is the NSN for 05-0236?
05-0236 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-147-3445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05-0236