PartsTable
Technical Data Sheet
Download PDF

05-0210 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

05-0210: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: ANESTHESIA FACE MASK; AMBU; SIZE 5; TO BE USED WITH DRAWOVER ANESTHESIA VAPORIZER, end_item_identification: 6515-01-355-6479, DRAWOVER VAPORIZER, part_name_assigned_by_controlling_agency: FACE MASK AMBU SIZE 5 F/DRAWOVER VAPORIZER. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-433-1130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
05-0210
NSN: 5330-00-433-1130
NIINs: 004331130, 015281361
FSC: 5330 — Packing and Gasket Materials
CAGE: 14561 — MAGNATROL VALVE CORP DIV CLARK-COOPER (USA)
SPECIFICATIONS
special_featuresANESTHESIA FACE MASK; AMBU; SIZE 5; TO BE USED WITH DRAWOVER ANESTHESIA VAPORIZER
end_item_identification6515-01-355-6479, DRAWOVER VAPORIZER
part_name_assigned_by_controlling_agencyFACE MASK AMBU SIZE 5 F/DRAWOVER VAPORIZER
NSN5330-00-433-1130
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 05-0210 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 1.750 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER1.750 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.500 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
SH12-4N80Reference document
Same NSN cross-reference
Reference document — Secondary reference
2001-60AReference document
Same NSN cross-reference
Reference document — Secondary reference
D2200Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
05-04-11Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D-2200 PIECE 80Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 05-0210?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05-0210?
05-0210 is a PACKING,PREFORMED.
What parts can replace 05-0210?
There are 5 known substitutes for 05-0210: SH12-4N80, 2001-60A, D2200 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 05-0210?
05-0210 is cataloged in the U.S. Government catalog under NSN 5330-00-433-1130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05-0210