PartsTable
Technical Data Sheet
PartsTable / MRO / 05-02-06
05-02-06 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The ADAPTER,SWITCH ACTUATOR is a Legrand industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.000 INCHES MINIMUM AND 1.000 INCHES MINIMUM AND 1.062 INCHES MAXIMUM1.062 INCHES MAXIMUM IN, overall_height: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, hardness_rating: 45.0 ROCKWELL C MINIMUM45.0 ROCKWELL C MINIMUM, outside_diameter: 1.562 INCHES MINIMUM AND 1.562 INCHES MINIMUM AND 1.625 INCHES MAXIMUM1.625 INCHES MAXIMUM IN, surface_treatment: ZINC AND PHOSPHATE AND OIL OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-067-6888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 05-02-06
NSN: 5310-01-067-6888
FSC: 5310
CAGE: 91051 — PARKER-HANNIFIN CORPORATION DBA REFRIGERATION SPECIALTIES DIV REFRIGERATING SPECIALTIES DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.000 INCHES MINIMUM AND 1.000 INCHES MINIMUM AND 1.062 INCHES MAXIMUM1.062 INCHES MAXIMUM IN
overall_height0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
hardness_rating45.0 ROCKWELL C MINIMUM45.0 ROCKWELL C MINIMUM
outside_diameter1.562 INCHES MINIMUM AND 1.562 INCHES MINIMUM AND 1.625 INCHES MAXIMUM1.625 INCHES MAXIMUM IN
special_features1000-3000 MG PER SQ FT SURFACE TREATMENT IAW SPEC AFTER HARDENING1000-3000 MG PER SQ FT SURFACE TREATMENT IAW SPEC AFTER HARDENING
surface_treatmentZINC AND PHOSPHATE AND OIL OVERALL
material_thickness0.020 INCHES NOMINAL0.020 INCHES NOMINAL IN
surface_treatment_document_and_classificationE.S.P.,6.3.1.1 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-067-6888
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 05-02-06 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.562 INCHES MINIMUM AND 1.562 INCHES MINIMUM AND 1.625 INCHES MAXIMUM1.625 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL0.020 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: E.S.P.,6.3.1.1 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: ZINC AND PHOSPHATE AND OIL OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM45.0 ROCKWELL C MINIMUM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.562 INCHES MINIMUM AND 1.562 INCHES MINIMUM AND 1.625 INCHES MAXIMUM1.625 INCHES MAXIMUM IN
OVERALL HEIGHT0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL0.020 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SPECIAL FEATURES1000-3000 MG PER SQ FT SURFACE TREATMENT IAW SPEC AFTER HARDENING1000-3000 MG PER SQ FT SURFACE TREATMENT IAW SPEC AFTER HARDENING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONE.S.P.,6.3.1.1 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTZINC AND PHOSPHATE AND OIL OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM45.0 ROCKWELL C MINIMUM
HOLE DIAMETER1.000 INCHES MINIMUM AND 1.000 INCHES MINIMUM AND 1.062 INCHES MAXIMUM1.062 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
05-02-06-00Interchangeable
interchangeable cross-reference
interchangeable
05-02-06Interchangeable
interchangeable cross-reference
interchangeable
19207Interchangeable
interchangeable cross-reference
interchangeable
80100013Interchangeable
interchangeable cross-reference
interchangeable
0208652Interchangeable
interchangeable cross-reference
interchangeable
0223100Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 05-02-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 05-02-06?
05-02-06 is a ADAPTER,SWITCH ACTUATOR manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 05-02-06?
There are 6 known substitutes for 05-02-06: 05-02-06-00, 05-02-06, 19207 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 05-02-06?
05-02-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-067-6888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 05-02-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026