PartsTable
Technical Data Sheet
Download PDF

049575 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

049575: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include first_end_style: SQUARE, pin_overall_length: 1.875 INCHES NOMINAL IN, first_hole_diameter: 0.115 INCHES NOMINAL IN, pin_overall_diameter: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, second_hole_diameter: 0.115 INCHES NOMINAL IN, hole_arrangement_style: BOTH END DRILLED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-352-2816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
049575
NSN: 5315-01-352-2816
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59276 — BRUDI INC (USA)
SPECIFICATIONS
first_end_styleSQUARE
pin_overall_length1.875 INCHES NOMINAL IN
first_hole_diameter0.115 INCHES NOMINAL IN
pin_overall_diameter0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
second_hole_diameter0.115 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes1.625 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.125 INCHES NOMINAL IN
NSN5315-01-352-2816
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 049575 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: SQUARE
•
FIRST HOLE DIAMETER: 0.115 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.875 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SECOND HOLE DIAMETER: 0.115 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLESQUARE
FIRST HOLE DIAMETER0.115 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.875 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.115 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES1.625 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
A49575Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 049575?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 049575?
049575 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 049575?
There is 1 known substitute for 049575: A49575. Substitute compatibility should be verified for your specific system.
What is the NSN for 049575?
049575 is cataloged in the U.S. Government catalog under NSN 5315-01-352-2816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 049575

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.