PartsTable
Technical Data Sheet
048661 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, housing_bore_diameter: 1.499 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-081-1691, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
048661
NSN: 5330-00-081-1691
FSC: 5330
CAGE: 83299 — HYSTER-YALE GROUP, INC. DBA YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
housing_bore_diameter1.499 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.031 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-081-1691
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 048661 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOUSING BORE DIAMETER: 1.499 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER: 1.031 INCHES NOMINAL IN
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLE: ANGULAR
SEAL WIDTH: 0.312 INCHES NOMINAL IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER1.499 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.031 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
SEAL WIDTH0.312 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
10321Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE4SInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-15291/1Interchangeable
interchangeable cross-reference
interchangeable
4055-16PC23Interchangeable
interchangeable cross-reference
interchangeable
J87-0122Interchangeable
interchangeable cross-reference
interchangeable
AE116-016-99Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 048661?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 048661?
048661 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 048661?
There are 20 known substitutes for 048661: 10321, FFS92TYPE1STYLE4S, MIL-DTL-15291/1 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 048661?
048661 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-081-1691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 048661