PartsTable
Technical Data Sheet
Download PDF

04730-0104-40-2 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

04730-0104-40-2: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.425 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 7075 OVERALL, closed_length: 24.600 INCHES MINIMUM AND 24.660 INCHES MAXIMUM IN, extended_length: 48.000 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-067-3816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
04730-0104-40-2
NSN: 5340-01-067-3816
FSC: 5340 — Hardware, Commercial
CAGE: 83508 — HETTICH AMERICA, L.P. (USA)
SPECIFICATIONS
width0.425 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
materialALUMINUM ALLOY 7075 OVERALL
closed_length24.600 INCHES MINIMUM AND 24.660 INCHES MAXIMUM IN
extended_length48.000 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
surface_treatmentANODIZE OVERALL
side_for_which_designedRIGHT HAND
material_document_and_classificationQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-067-3816
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 04730-0104-40-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 48.000 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CLOSED LENGTH: 24.600 INCHES MINIMUM AND 24.660 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.425 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 7075 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH48.000 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CLOSED LENGTH24.600 INCHES MINIMUM AND 24.660 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
WIDTH0.425 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 7075 OVERALL
SIDE FOR WHICH DESIGNEDRIGHT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1503516RReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 04730-0104-40-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04730-0104-40-2?
04730-0104-40-2 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 04730-0104-40-2?
There is 1 known substitute for 04730-0104-40-2: 1503516R. Substitute compatibility should be verified for your specific system.
What is the NSN for 04730-0104-40-2?
04730-0104-40-2 is cataloged in the U.S. Government catalog under NSN 5340-01-067-3816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 04730-0104-40-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.