PartsTable
Technical Data Sheet
Download PDF

0441C0098-20 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

0441C0098-20: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.190 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-076-6078, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0441C0098-20
NSN: 5305-01-076-6078
FSC: 5305 — Screws
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length0.190 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.190 INCHES NOMINAL IN
special_featuresWASHER NYLON PER MIL-P-17091B AND M-20693A A
thread_directionRIGHT-HAND
features_providedWASHER
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-076-6078
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0441C0098-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.190 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.190 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FEATURES PROVIDED: WASHER
•
HEAD STYLE: PAN NO. 2
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.190 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.190 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
FEATURES PROVIDEDWASHER
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 9S STYLE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0441C0098-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0441C0098-20?
0441C0098-20 is a SCREW,MACHINE.
What is the NSN for 0441C0098-20?
0441C0098-20 is cataloged in the U.S. Government catalog under NSN 5305-01-076-6078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0441C0098-20