PartsTable
Technical Data Sheet
Download PDF

0441C0028-18 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

0441C0028-18: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: SPLINE, nut_height: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN, nut_diameter: 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN, pilot_length: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-024-7197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0441C0028-18
NSN: 5310-01-024-7197
FSC: 5310 — Nuts and Washers
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleSPLINE
nut_height0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
nut_diameter0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
pilot_length0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.366 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch20
NSN5310-01-024-7197
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0441C0028-18 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.366 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
PILOT DIAMETER0.366 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
PILOT LENGTH0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
NUT HEIGHT0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
6255D-SS-2520Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6255SD-SS-2520Reference document
Same NSN cross-reference
Reference document — Secondary reference
6255-D-SS-2520-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0441C0028-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0441C0028-18?
0441C0028-18 is a NUT,PLAIN,SPLINE.
What parts can replace 0441C0028-18?
There are 3 known substitutes for 0441C0028-18: 6255D-SS-2520, 6255SD-SS-2520, 6255-D-SS-2520-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 0441C0028-18?
0441C0028-18 is cataloged in the U.S. Government catalog under NSN 5310-01-024-7197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0441C0028-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.