PartsTable
Technical Data Sheet
Download PDF

043030 — TIE ROD,STEERING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

043030: TIE ROD,STEERING.

The TIE ROD,STEERING is a the manufacturer industrial component. Key specifications include diameter: 0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, material: STEEL COMP 1017 BAND, overall_width: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.0598 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-350-5666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
043030
NSN: 5340-00-350-5666
NIINs: 003505666, 017274124
FSC: 5340 — Hardware, Commercial
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
diameter0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
materialSTEEL COMP 1017 BAND
overall_width0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.0598 INCHES NOMINAL IN
loop_inside_diameter0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-636,COND 4 OR 5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.657 INCHES MINIMUM AND 1.791 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
NSN5340-00-350-5666
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 043030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-636,COND 4 OR 5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0598 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.657 INCHES MINIMUM AND 1.791 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636,COND 4 OR 5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
OVERALL WIDTH0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0598 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.657 INCHES MINIMUM AND 1.791 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1017 BAND
LOOP INSIDE DIAMETER0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
0043030Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0043030-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 043030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 043030?
043030 is a TIE ROD,STEERING.
What parts can replace 043030?
There are 2 known substitutes for 043030: 0043030, 0043030-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 043030?
043030 is cataloged in the U.S. Government catalog under NSN 5340-00-350-5666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 043030

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.