PartsTable
Technical Data Sheet
Download PDF

04282PS — PADLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

04282PS: PADLOCK.

The PADLOCK is a the manufacturer industrial component. Key specifications include construction: SOLID, overall_width: 1.750 INCHES NOMINAL IN, overall_height: 1.438 INCHES NOMINAL IN, shackle_diameter: 0.313 INCHES NOMINAL IN, shackle_clearance: 0.813 INCHES NOMINAL IN, key_change_quantity: 1800. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-260-1314, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
04282PS
NSN: 5340-00-260-1314
FSC: 5340 — Hardware, Commercial
CAGE: 72795 — EAGLE LOCK CORP (USA)
SPECIFICATIONS
constructionSOLID
overall_width1.750 INCHES NOMINAL IN
overall_height1.438 INCHES NOMINAL IN
shackle_diameter0.313 INCHES NOMINAL IN
shackle_clearance0.813 INCHES NOMINAL IN
key_change_quantity1800
operating_mechanism_typePIN TUMBLER
nondefinitive_spec/std_dataEPB TYPE
NSN5340-00-260-1314
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 04282PS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHACKLE CLEARANCE: 0.813 INCHES NOMINAL IN
•
KEY CHANGE QUANTITY: 1800
•
OPERATING MECHANISM TYPE: PIN TUMBLER
•
NONDEFINITIVE SPEC/STD DATA: EPB TYPE
•
SHACKLE DIAMETER: 0.313 INCHES NOMINAL IN
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.438 INCHES NOMINAL IN
SHACKLE CLEARANCE0.813 INCHES NOMINAL IN
KEY CHANGE QUANTITY1800
OPERATING MECHANISM TYPEPIN TUMBLER
OVERALL WIDTH1.750 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAEPB TYPE
SHACKLE DIAMETER0.313 INCHES NOMINAL IN
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 1
FFP101BTYPEEPBReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 04282PS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04282PS?
04282PS is a PADLOCK.
What parts can replace 04282PS?
There is 1 known substitute for 04282PS: FFP101BTYPEEPB. Substitute compatibility should be verified for your specific system.
What is the NSN for 04282PS?
04282PS is cataloged in the U.S. Government catalog under NSN 5340-00-260-1314. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 04282PS