PartsTable
Technical Data Sheet
Download PDF

0424-1 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

0424-1: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.043 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-268-7306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0424-1
NSN: 5310-00-268-7306
NIINs: 002687306, 010469465
FSC: 5310 — Nuts and Washers
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.043 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
features_providedMEDIUM SPEED AND MONOLITHIC
output_logic_formCOMPLEMENTARY-LOGIC
surface_treatmentPASSIVATE OVERALL
inclosure_materialPLASTIC
width_across_flats0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
nominal_thread_size0.060 INCHES IN
NSN5310-00-268-7306
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0424-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.060 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 13 STYLE
•
NUT HEIGHT: 0.043 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.150 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.060 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 13 STYLE
NUT HEIGHT0.043 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH80
SUBSTITUTES & CROSS-REFERENCES 5
011600Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN345C0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFN836Reference document
Same NSN cross-reference
Reference document — Identification reference
8168808Reference document
Same NSN cross-reference
Reference document — Secondary reference
SS0-80Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 0424-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0424-1?
0424-1 is a MICROCIRCUIT,DIGITAL.
What parts can replace 0424-1?
There are 5 known substitutes for 0424-1: 011600, AN345C0, FFN836 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0424-1?
0424-1 is cataloged in the U.S. Government catalog under NSN 5310-00-268-7306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0424-1