PartsTable
Technical Data Sheet
Download PDF

0411-94 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

0411-94: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN, thread_length: 0.118 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 303SE, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-068-4589, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0411-94
NSN: 5305-01-068-4589
FSC: 5305 — Screws
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
thread_length0.118 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 303SE
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.099 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength100000 POUNDS PER SQUARE INCH LBS
NSN5305-01-068-4589
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0411-94 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 COND A OR COND B FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 COND A OR COND B FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 COND A OR COND B FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 COND A OR COND B FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 COND A FED SPEC 5TH MATERIAL RESPONSE OR ASTM A582 COND A ASSN STD 6TH MATERIAL RESPONSE
•
THREAD LENGTH: 0.118 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.099 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 303SE
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 COND A OR COND B FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 COND A OR COND B FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 COND A OR COND B FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 COND A OR COND B FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 COND A FED SPEC 5TH MATERIAL RESPONSE OR ASTM A582 COND A ASSN STD 6TH MATERIAL RESPONSE
THREAD LENGTH0.118 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.099 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 303SE
MINIMUM TENSILE STRENGTH100000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0411-94?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0411-94?
0411-94 is a SCREW,MACHINE.
What is the NSN for 0411-94?
0411-94 is cataloged in the U.S. Government catalog under NSN 5305-01-068-4589. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0411-94

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.