0405-01 — NUT,PLAIN,CLINCH

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

0405-01: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include width: 2.125 INCHES NOMINAL IN, length: 2.500 INCHES NOMINAL IN, material: COTTON, special_features: COTTON GAUZE PAD, COVERED; 2.5 BY 2 1/8INCH; 15PK IN, supplementary_features: THIS NSN IS NOT PROCURABLE. IT IS ONLY FOR USE BY THE MILITARY ASSEMBLIES.

PLEASE ORDER NSN 6510-01-107-7575, part_name_assigned_by_controlling_agency: PAD COTTON GAUZE COVERED2.5 BY 2 1/8INCH 15PK IN. This part is cataloged in the U.S. Government catalog under NSN 5310-01-011-9693, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

0405-01

NSN: 5310-01-011-9693
NIINs: 010119693, 015195817
FSC: 5310 — Nuts and Washers
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)

SPECIFICATIONS

width	2.125 INCHES NOMINAL IN
length	2.500 INCHES NOMINAL IN
material	COTTON
special_features	COTTON GAUZE PAD, COVERED; 2.5 BY 2 1/8INCH; 15PK IN
supplementary_features	THIS NSN IS NOT PROCURABLE. IT IS ONLY FOR USE BY THE MILITARY ASSEMBLIES. PLEASE ORDER NSN 6510-01-107-7575
part_name_assigned_by_controlling_agency	PAD COTTON GAUZE COVERED2.5 BY 2 1/8INCH 15PK IN
NSN	5310-01-011-9693

COMPONENT DIAGRAM

KEY FEATURES

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

HARDNESS RATING: 35.0 ROCKWELL C MAXIMUM

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.086 INCHES IN

•

NUT DIAMETER: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN

•

PILOT DIAMETER: 0.161 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN

•

PILOT LENGTH: 0.033 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN

•

NUT HEIGHT: 0.080 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING	35.0 ROCKWELL C MAXIMUM
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.086 INCHES IN
NUT DIAMETER	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
PILOT DIAMETER	0.161 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
PILOT LENGTH	0.033 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
NUT HEIGHT	0.080 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
SURFACE TREATMENT	CADMIUM OVERALL
NUT STYLE	CLINCH

SUBSTITUTES & CROSS-REFERENCES 6

334-0549-000Reference document

Same NSN cross-reference

Reference document — Secondary reference

10086-001Reference document

Same NSN cross-reference

Reference document — Secondary reference

M45938/1-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S-256-1CReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-N-45938/1Reference document

Same NSN cross-reference

Reference document — Identification reference

0405-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 0405-01?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 0405-01?

0405-01 is a NUT,PLAIN,CLINCH.

What parts can replace 0405-01?

There are 6 known substitutes for 0405-01: 334-0549-000, 10086-001, M45938/1-2 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 0405-01?

0405-01 is cataloged in the U.S. Government catalog under NSN 5310-01-011-9693. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

0405-01 — NUT,PLAIN,CLINCH

Request a Quote — 0405-01