PartsTable
Technical Data Sheet
Download PDF

040428A — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

040428A: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL COMP 1212, design_type: SOLID, end_diameter: 0.3540 INCHES MINIMUM AND 0.3570 INCHES MAXIMUM IN, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_height: 0.1875 INCHES NOMINAL IN, style_designator: SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-364-3144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
040428A
NSN: 5340-00-364-3144
FSC: 5340 — Hardware, Commercial
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
materialSTEEL COMP 1212
design_typeSOLID
end_diameter0.3540 INCHES MINIMUM AND 0.3570 INCHES MAXIMUM IN
bore_diameter0.1875 INCHES NOMINAL IN
overall_height0.1875 INCHES NOMINAL IN
style_designatorSEAT
first_step_diameter0.5000 INCHES NOMINAL IN
distance_from_end_to_first_step0.0937 INCHES NOMINAL IN
material_document_and_classificationSAE X1112, FSCM 81343 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-364-3144
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 040428A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.5000 INCHES NOMINAL IN
•
END DIAMETER: 0.3540 INCHES MINIMUM AND 0.3570 INCHES MAXIMUM IN
•
DISTANCE FROM END TO FIRST STEP: 0.0937 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
STYLE DESIGNATOR: SEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE X1112, FSCM 81343 ASSN STD SINGLE MATERIAL RESPONSE
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.1875 INCHES NOMINAL IN
FIRST STEP DIAMETER0.5000 INCHES NOMINAL IN
END DIAMETER0.3540 INCHES MINIMUM AND 0.3570 INCHES MAXIMUM IN
DISTANCE FROM END TO FIRST STEP0.0937 INCHES NOMINAL IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
MATERIAL DOCUMENT AND CLASSIFICATIONSAE X1112, FSCM 81343 ASSN STD SINGLE MATERIAL RESPONSE
BORE DIAMETER0.1875 INCHES NOMINAL IN
MATERIALSTEEL COMP 1212
SUBSTITUTES & CROSS-REFERENCES 3
040428Reference document
Same NSN cross-reference
Reference document — Secondary reference
3249166Reference document
Same NSN cross-reference
Reference document — Secondary reference
040428BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 040428A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 040428A?
040428A is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace 040428A?
There are 3 known substitutes for 040428A: 040428, 3249166, 040428B. Substitute compatibility should be verified for your specific system.
What is the NSN for 040428A?
040428A is cataloged in the U.S. Government catalog under NSN 5340-00-364-3144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 040428A