PartsTable
Technical Data Sheet
Download PDF

040350 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

040350: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, fork_depth: 0.500 INCHES NOMINAL IN, shank_length: 0.156 INCHES NOMINAL IN, hole_diameter: 0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN, overall_width: 0.500 INCHES NOMINAL IN, overall_height: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-354-1144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
040350
NSN: 5340-00-354-1144
FSC: 5340 — Hardware, Commercial
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
fork_depth0.500 INCHES NOMINAL IN
shank_length0.156 INCHES NOMINAL IN
hole_diameter0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
overall_width0.500 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
shank_diameter0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
fork_span_width0.185 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
fork_arm_thickness0.152 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_fork_end0.250 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end0.781 INCHES NOMINAL IN
NSN5340-00-354-1144
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 040350 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.185 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.152 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.250 INCHES NOMINAL IN
•
SHANK LENGTH: 0.156 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
OVERALL HEIGHT0.312 INCHES NOMINAL IN
FORK SPAN WIDTH0.185 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
FORK ARM THICKNESS0.152 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.250 INCHES NOMINAL IN
SHANK LENGTH0.156 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020 OVERALL
FORK DEPTH0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3249145Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 040350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 040350?
040350 is a CLEVIS,ROD END.
What parts can replace 040350?
There is 1 known substitute for 040350: 3249145. Substitute compatibility should be verified for your specific system.
What is the NSN for 040350?
040350 is cataloged in the U.S. Government catalog under NSN 5340-00-354-1144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 040350