PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 040210.1
040210.1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 040210.1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-458-6394, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
040210.1
NSN: 5340-01-458-6394
FSC: 5340
CAGE: 30234 — THERMO NESLAB INC. (USA)
SPECIFICATIONS
Part Number040210.1
NSN5340-01-458-6394
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 040210.1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
WIDTH: 32.0000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.2500 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 6
•
MATERIAL: STEEL
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 11.9450 INCHES NOMINAL IN
•
LENGTH: 30.8900 INCHES NOMINAL IN
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 3.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
WIDTH32.0000 INCHES NOMINAL IN
HOLE DIAMETER0.2500 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH6
MATERIALSTEEL
DISTANCE BETWEEN HOLES ALONG LENGTH11.9450 INCHES NOMINAL IN
LENGTH30.8900 INCHES NOMINAL IN
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH3.5000 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH31.5000 INCHES NOMINAL IN
SPECIAL FEATURES16 GAGE GALVANIZED SHEET METAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
040-2-101Upgraded Successor
successor cross-reference
successor
IF280-140NUpgraded Successor
successor cross-reference
successor
AA961M015A1Interchangeable
interchangeable cross-reference
interchangeable
202D967X0015A1Interchangeable
interchangeable cross-reference
interchangeable
5310005321040Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 040210.1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 040210.1?
040210.1 is a 040210.1.
What parts can replace 040210.1?
There are 5 known substitutes for 040210.1: 040-2-101, IF280-140N, AA961M015A1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 040210.1?
040210.1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-458-6394. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 040210.1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026