The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, overall_width: 110.6 MILLIMETERS MINIMUM AND 111.4 MILLIMETERS MAXIMUM MM, aperture_width: 78.6 MILLIMETERS MINIMUM AND 79.4 MILLIMETERS MAXIMUM MM, overall_height: 0.125 INCHES NOMINAL IN, overall_length: 117.6 MILLIMETERS MINIMUM AND 118.4 MILLIMETERS MAXIMUM MM, aperture_length: 85.6 MILLIMETERS MINIMUM AND 86.4 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-597-1377, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
04-20536
NSN:5330-01-597-1377 FSC:5330 — Packing and Gasket Materials CAGE:30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
material
RUBBER OVERALL
overall_width
110.6 MILLIMETERS MINIMUM AND 111.4 MILLIMETERS MAXIMUM MM
aperture_width
78.6 MILLIMETERS MINIMUM AND 79.4 MILLIMETERS MAXIMUM MM
overall_height
0.125 INCHES NOMINAL IN
overall_length
117.6 MILLIMETERS MINIMUM AND 118.4 MILLIMETERS MAXIMUM MM
aperture_length
85.6 MILLIMETERS MINIMUM AND 86.4 MILLIMETERS MAXIMUM MM
style_designator
NON-CIRCULAR
bolt_hole_quantity
14
end_item_identification
6115-01-561-7718 GENERATOR SET, DIESEL ENGINE
cross-sectional_thickness
0.125 INCHES NOMINAL IN
largest_bolt_hole_diameter
8.9 MILLIMETERS MINIMUM AND 9.2 MILLIMETERS MAXIMUM MM
largest_bolt_hole_quantity
8
NSN
5330-01-597-1377
COMPONENT DIAGRAM
KEY FEATURES
•
SMALLEST BOLT HOLE QUANTITY: 6
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH: 15.6 MILLIMETERS MINIMUM AND 16.4 MILLIMETERS MAXIMUM MM
•
LARGEST BOLT HOLE QUANTITY: 8
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855, CLASS 1, BUNA-N MATERIAL MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.125 INCHES NOMINAL IN
SMALLEST BOLT HOLE QUANTITY
6
CROSS-SECTIONAL THICKNESS
0.125 INCHES NOMINAL IN
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH
15.6 MILLIMETERS MINIMUM AND 16.4 MILLIMETERS MAXIMUM MM
LARGEST BOLT HOLE QUANTITY
8
STYLE DESIGNATOR
NON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-6855, CLASS 1, BUNA-N MATERIAL MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH
117.6 MILLIMETERS MINIMUM AND 118.4 MILLIMETERS MAXIMUM MM
SMALLEST BOLT HOLE DIAMETER
5.5 MILLIMETERS MINIMUM AND 5.8 MILLIMETERS MAXIMUM MM
OVERALL WIDTH
110.6 MILLIMETERS MINIMUM AND 111.4 MILLIMETERS MAXIMUM MM
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04-20536?
04-20536 is a GASKET.
What parts can replace 04-20536?
There is 1 known substitute for 04-20536: A026J486. Substitute compatibility should be verified for your specific system.
What is the NSN for 04-20536?
04-20536 is cataloged in the U.S. Government catalog under NSN 5330-01-597-1377. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.