PartsTable
Technical Data Sheet
Download PDF

04-0796 — TUBE,BINOCULAR,HIGH INCLINED

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

04-0796: TUBE,BINOCULAR,HIGH INCLINED.

The TUBE,BINOCULAR,HIGH INCLINED is a the manufacturer industrial component. Key specifications include special_features: BINOCULAR TUBE FOR THE SURGICAL MICROSCOPE MODEL M501 BY LEICA, NSN 6515-01-519-1180, HIGH INCLINED, part_name_assigned_by_controlling_agency: TUBE BINOCULAR FOR LEICA SURGICAL MICROSCOPE NSN 6515-01-519-1180 HIGH INCLINED. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-022-4685, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
04-0796
NSN: 5305-00-022-4685
NIINs: 000224685, 006645635, 015203486
FSC: 5305 — Screws
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
special_featuresBINOCULAR TUBE FOR THE SURGICAL MICROSCOPE MODEL M501 BY LEICA, NSN 6515-01-519-1180, HIGH INCLINED
part_name_assigned_by_controlling_agencyTUBE BINOCULAR FOR LEICA SURGICAL MICROSCOPE NSN 6515-01-519-1180 HIGH INCLINED
NSN5305-00-022-4685
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 04-0796 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.061 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.099 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 303
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.061 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.099 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 303
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 2
407-96Reference document
Same NSN cross-reference
Reference document — Secondary reference
0407-449Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 04-0796?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04-0796?
04-0796 is a TUBE,BINOCULAR,HIGH INCLINED.
What parts can replace 04-0796?
There are 2 known substitutes for 04-0796: 407-96, 0407-449. Substitute compatibility should be verified for your specific system.
What is the NSN for 04-0796?
04-0796 is cataloged in the U.S. Government catalog under NSN 5305-00-022-4685. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 04-0796

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.